Here is our easy and cost effective way to make your 2JZ-GE look great!
With it’s waved, progressive honeycomb vents, our engine cover looks descreet but sporty.
Stick with your OEM magnesium valve covers and take advantage of their light weight!
Our engine cover gets laser cut and pressed into shape to avoid bending marks. To give you the best possible surface finish and scratch resistance, it gets sand blasted, anodized and finally laser engraved with our logo.
Our mounting harware is specially designed so the engine cover can be removed quickly and easily.
Even if you have aftermarket coil brackets which are held down by the valvecover bolts, our spacers can still be used and will hold your brackets down, no matter what thickness they are.
4x stainless steel allen head bolts
4x stainless steel spacers
4x stainless steel spacer bolts
You will have to drill a hole into the timing cover for the 4th mounting bolt.
ALL 2JZ-GE VERSIONS AVAILABLE
All 3 versions available:
ONLY compatible with front facing intake manifolds.
Please check your coil height! Every coil that fits under the stock timing cover, will fit under our engine cover.
When using coil brackets which are also mounted by the valve cover bolts, you can either shorten the spacers by the thickness of the coil brackets, or replace the spacers with nuts, which will hold your brackets down.
Make sure, that the coil brackets you are using do NOT cover the valve cover bolts, which are needed to mount the engine cover.
- R35 coils (short stalks)
- stock coils
- short VAG coils
Does NOT work with:
- long VAG coils (red R8)
- Yaris coils