Dodo 1JZ 2JZ Coil on Plug Kit
US stock
Coil on Plug Kit for all 1JZ & 2JZ engines
The stainless steel brackets are only needed for 2JZ-GE non VVTi. For all other JZ engines, the bracket can be installed directly onto the cylinder head.
CUSTOM DESIGN
Our coil housing and coil boot are custom designed to fit in between the valve covers. This keeps the coils as low as possible. Fits under your 1JZ / 2JZ timing cover!
SMART COILS
No external Igniter required.
HIGH SPARK ENERGY
Our coils are the most powerful option for the 2JZ that still fits under your stock timing cover. Power output: 124mJ!
We see it as our responsibility to have replacement coils in stock at any time.
FITS WITH STOCK 2JZ-GE INTAKE
Our Ignition Coils are the ONLY upgrade Coil on Plug which will fit under your stock GE Intake!
Therefore you will additionally need our Reverse Mount Bracket.
INCLUDED
– 6x Dodo 2JZ Coil on Plug
– Billet Aluminium Coil Brackets
– Stainless Steel Hardware
– 6x Connector
ADDITIONAL INFORMATION
The stock GE throttle cable bracket needs to be cut in order to clear the coil.
Because 2JZ-GE nonVVTi Y-pipes are longer than VVTi Y-pipes, it interferes with the coils and WILL NOT fit.
- Our Coils come with all required connectors with spare pins.
- 3-Pin-Coils (12V supply, GND, 5-12V Trigger)
- GND to cylinder head
- you need to add 6x trigger wires to ECU and 1x 12V supply
To use our coils with stock ECU you need to bypass the stock igniter and connect them in pairs, however we do not recommend it. You will NOT be able to set the correct Dwell times and the coils will work in wasted spark.
Note: These are our recommended Dwell settings for best performance/efficiency. If you experience spark blow out, gradually increase Dwell. Don’t exceed the max. allowed Dwell.
Caution: Wrong Dwell settings can destroy your ignition coils!
max. current draw: 20A @ 4ms dwell
| origin | made in China |
|---|---|
| color | cyan, black |